Tristan
Další nápady od uživatele Tristan
Складной табурет своими руками

Складной табурет своими руками

This project is not for the average DIYer as it requires access to a CNC machine to cut the pattern in the ply. But if you have a very good hand and an equally good jigsaw you should have no difficulty either.  http://diyprojects.ideas2live4.com/2014/09/02/diy-knife-block/  The last option would be a good, old-fashioned fret saw but we’re guessing there are not too many of those in your tool kit :)  Would you like to have one in your kitchen?

This project is not for the average DIYer as it requires access to a CNC machine to cut the pattern in the ply. But if you have a very good hand and an equally good jigsaw you should have no difficulty either. http://diyprojects.ideas2live4.com/2014/09/02/diy-knife-block/ The last option would be a good, old-fashioned fret saw but we’re guessing there are not too many of those in your tool kit :) Would you like to have one in your kitchen?

Use a blow torch to create a duo-tone effect on wood. Lay the torch at such an angle that the flame licks across the surface as you move horizontally. After that, wipe it down with a wet cloth and start the staining process. Assemble the legs and the shelves, place a glass top over it, and you’re done!

Use a blow torch to create a duo-tone effect on wood. Lay the torch at such an angle that the flame licks across the surface as you move horizontally. After that, wipe it down with a wet cloth and start the staining process. Assemble the legs and the shelves, place a glass top over it, and you’re done!

Waterfall edge bench

Waterfall edge bench

DIY Barn Door from Simple 2×6′s TUTORIAL

DIY Barn Door from Simple 2×6′s TUTORIAL

Barn door details. Tabs prevent hoping off track. I have seen a double roller set up in stead of the tabs Top and bottom offset.

Barn door details. Tabs prevent hoping off track. I have seen a double roller set up in stead of the tabs Top and bottom offset.

Reversible 1/2-Inch Shank With Yonico 15133 Drawer Front Joint Router Bit

Reversible 1/2-Inch Shank With Yonico 15133 Drawer Front Joint Router Bit

katana raised panel door router bit set

katana raised panel door router bit set

Enables curved frames to be moulded... SASH #BAR #OVOLO #JOINT #CUTTER 17MM RADIUS (http://www.woodfordtooling.com/craftpro-router-cutters/ovolo-jointers-scribers/glazing-bar/sash-bar-ovolo-joint-cutter-17mm-radius.html)

Enables curved frames to be moulded... SASH #BAR #OVOLO #JOINT #CUTTER 17MM RADIUS (http://www.woodfordtooling.com/craftpro-router-cutters/ovolo-jointers-scribers/glazing-bar/sash-bar-ovolo-joint-cutter-17mm-radius.html)