jirka venclik

jirka venclik

0 followers
·
5 followers
jirka venclik
More ideas from jirka
Make Your Own Corner Clamps #TrimWoodworkIdeas

Make Your Own Corner Clamps #TrimWoodworkIdeas

When mounting corner blocks to reinforce a frame or case, use a clamp block on the outside to provide a flat surface for secure clamping and to prevent damage to parts. For example, to mount corner blocks on the table shown, make a clamp block with a notch from 3/4"-thick scrap. Then glue and clamp the corner block in place. Now drill the mounting holes. (We used a combination drill and countersink bit to do this.)

When mounting corner blocks to reinforce a frame or case, use a clamp block on the outside to provide a flat surface for secure clamping and to prevent damage to parts. For example, to mount corner blocks on the table shown, make a clamp block with a notc

When gluing up 90 degree corners, or whole picture frames, using a "Tie-Down" that is long enough to wrap around the whole frame can work wonders. Using some 90 degree angle pieces, wrap the tie-down around the whole frame *be sure to take a moment to align the corners before you tighten up* and you will end up with a well-clamped frame that just needs to wait for the glue to dry. #woodworking #wood

When gluing up 90 degree corners, or whole picture frames, using a "Tie-Down" that is long enough to wrap around the whole frame can work wonders. Using some 90 degree angle pieces, wrap the tie-down around the whole frame *be sure to take a moment to align the corners before you tighten up* and you will end up with a well-clamped frame that just needs to wait for the glue to dry. #woodworking #wood