Jiří Tauer
Další nápady od uživatele Jiří
Compact Open Spaces!  But I LOVE the green house one!  Would so love to live in a house like that when I retire.

Compact Open Spaces! But I LOVE the green house one! Would so love to live in a house like that when I retire.

DIY Tip of the Day: Cabinet Assembly Station. Here’s a third hand that will ensure square, no-hassle cabinet assemblies. Cut four 7-in. long 2x6s and screw or nail them to a plywood base, leaving exactly square crisscross channels just wide enough for the cabinet parts to fit in snugly. When you assemble the cabinet, the station will keep the parts vertical and aligned while you apply glue or pound in nails.

DIY Tip of the Day: Cabinet Assembly Station. Here’s a third hand that will ensure square, no-hassle cabinet assemblies. Cut four 7-in. long 2x6s and screw or nail them to a plywood base, leaving exactly square crisscross channels just wide enough for the cabinet parts to fit in snugly. When you assemble the cabinet, the station will keep the parts vertical and aligned while you apply glue or pound in nails.

A jig and screw kit allows fast installation of decking without pilot holes. The secret is an augering screw that hogs out wood as it's driven, along with a special tool that holds it at the proper angle and acts as a board spacer. DeckPac, about $60; camofasteners.com

A jig and screw kit allows fast installation of decking without pilot holes. The secret is an augering screw that hogs out wood as it's driven, along with a special tool that holds it at the proper angle and acts as a board spacer. DeckPac, about $60; camofasteners.com

Power tool holder with PVC pipe :: OrganizingMadeFun.com

Power tool holder with PVC pipe :: OrganizingMadeFun.com

How to Scribe for a Perfect Fit - I scribed a 1×4 then trimmed and adjusted it to a really tight fit then transfered the pattern to my filler strip and made my actual cut. Maybe someday I'll trust making the first cut on the expensive piece.

How to Scribe for a Perfect Fit - I scribed a 1×4 then trimmed and adjusted it to a really tight fit then transfered the pattern to my filler strip and made my actual cut. Maybe someday I'll trust making the first cut on the expensive piece.

used to scribe a cut line precisely to your too wavy wall.

used to scribe a cut line precisely to your too wavy wall.

Simple Scribe - Woodworking - as always, thinking how this could be done in wood - by me even!

Simple Scribe - Woodworking - as always, thinking how this could be done in wood - by me even!

This perfect marking tool straddles your board to mark a perfectly centered line, or you can use the notches to mark offset lines from 1/16'' to 1/2'' from the edge in 1/16'' increments.

This perfect marking tool straddles your board to mark a perfectly centered line, or you can use the notches to mark offset lines from 1/16'' to 1/2'' from the edge in 1/16'' increments.

Veritas® Transfer/Log Scribe ::   The Veritas transfer scribe is used for transferring the contours of one shape onto another. This is what makes it an ideal log scribe. But this also makes it an excellent carpenter’s scribe.  |  http://www.leevalley.com/US/wood/page.aspx?p=32577&cat=1,41131

Veritas® Transfer/Log Scribe :: The Veritas transfer scribe is used for transferring the contours of one shape onto another. This is what makes it an ideal log scribe. But this also makes it an excellent carpenter’s scribe. | http://www.leevalley.com/US/wood/page.aspx?p=32577&cat=1,41131

Blokkz Clamping Blocks - Attached to your work, these blocks provide a secure…:

Blokkz Clamping Blocks - Attached to your work, these blocks provide a secure…: