1″ x 1/2″ Cylinder Black Plastic Coating Magnetic Whiteboard Holding Magnets - HSMAG
1″ x 1/2″ Cylinder Black Plastic Coating Magnetic Whiteboard Holding Magnets Parameter: Part No.: PCCNM-B Series Size: 1″ long x 1/2″ wide (12.7mm x 6.35 mm) Material: Neodymium (NdFeB, NIB) Magnet Grade: N42, N45, N48, N50 Magnet Shape: Cylinder / Rod /Bar Color: Black Plating/Coating: Ni-Cu-Ni-Plastic (Nickel-Copper-Nickel-Plastic) Max Operating Temp: 176ºF (80ºC) Tolerances: ±0.004″ x ±0.004″ Magnetization Direction: Magnetized Through Thickness (Poles on Flat Ends)
1″ x 1/2″ x 1/4″ Block Green Plastic Coated Waterproof NdFeB Magnets - HSMAG
Powerful neodymium block & rectangle shaped magnets. Blocks are wide (larger in long than thickness) and have a low profile. Rectangular magnets are more cost effective than rings and other shapes. Ideal for whiteboard magnets, office magnets, refrigerator magnets, and map pins. Perfect for hanging papers directly on any magnetic surface (except glass). Hold and categorise letters, bills, receipts, lists, paperwork & memos together! Write on them Label them with DYMO/Brother label
1″ x 1/2″ Cylinder Black Plastic Coating Magnetic Whiteboard Holding Magnets - HSMAG
The magnetic force is so great that simply trying to pry them apart will end up breaking a bar or snapping one of the discs in half. 1/2″ x 1/2″ x 1/2″ Yellow Polypropylene Coating Neodymium Magnet Cubes The plastic coating accomplishes 2 things. It allows them to slide on each other a little bit easier to separate. It also provides a little bit is some cushioning so the sharp edges don’t touch and cause a stress point where the material will break.
1″ x 1/2″ Cylinder Black Plastic Coating Magnetic Whiteboard Holding Magnets - HSMAG
These rods are protected by a thick plastic coating. They work very well in salt water and other harsh environments. The picture to the left is a similar but not identical magnet. It will be updated asap. They are fun to play with, but these magnets have many practical uses as well. Use them on the fridge. Put them to work in the tool shed. Use them as fasteners on cabinetry. They are great for science experiments. You are limited only by your imagination. We welcome your own
1″ x 1/2″ Cylinder Black Plastic Coating Magnetic Whiteboard Holding Magnets - HSMAG
1″ x 1/2″ Cylinder Black Plastic Coating Magnetic Whiteboard Holding Magnets PCCNM-B Series, Cylindrical & Rod Plastic Neodymium Rare Earth Magnet, ABS Plastic Coating Powerful Customized NdFeB Bar Magnets, Magnetic Dry Erase Boards Holder Magnets Supplier & Exporter
1″ x 1/2″ Cylinder Black Plastic Coating Magnetic Whiteboard Holding Magnets - HSMAG
1″ x 1/2″ Cylinder Black Plastic Coating Magnetic Whiteboard Holding Magnets PCCNM-B Series, Cylindrical & Rod Plastic Neodymium Rare Earth Magnet, ABS Plastic Coating Powerful Customized NdFeB Bar Magnets, Magnetic Dry Erase Boards Holder Magnets Supplier & Exporter
1″ x 1/2″ White Plastic Coated Neodymium Cylinder Magnet - HSMAG
Magnetisation Grade: N35 Magnet Material: Neodymium Iron Boron (NdFeB, Neo) Plating/Coating: Rubber or Plastic Jacket Magnetisation Direction: Axial / Diametrical Residual Magnetic Flux Density (Br): 1170-1220 mT (11.7-12.2 kGs) Energy Density (BH) max: 263-287 KJ/m³ (33-36 MGOe) Coercivity Force (Hcb): ≥ 868 kA/m ( ≥ 10.9 kOe) Intrinsic Coercivity Force (Hcj): ≥ 955 kA/m ( ≥ 12 kOe) Maximum Operation Temperature 80 °C Delivery Time: 7-30 days Specifications: 1. Powerful Permanent Pot Magnet
1″ x 1/2″ White Plastic Coated Neodymium Cylinder Magnet - HSMAG
1″ x 1/2″ White Plastic Coated Neodymium Cylinder Magnet parameter Part No.: PCCNM-W Series Size: 1″ long x 1/2″ wide (12.7mm x 6.35 mm) Material: Neodymium (NdFeB, NIB) Magnet Grade: N42, N45, N48, N50 Magnet Shape: Cylinder / Rod /Bar Color: White Plating/Coating: Ni-Cu-Ni-Plastic (Nickel-Copper-Nickel-Plastic) Max Operating Temp: 176ºF (80ºC) Tolerances: ±0.004″ x ±0.004″ Magnetization Direction: Magnetized Through Thickness (Poles on Flat Ends) **Magnet size is prior to plastic coating
1″ x 1/2″ White Plastic Coated Neodymium Cylinder Magnet - HSMAG
1″ x 1/2″ White Plastic Coated Neodymium Cylinder Magnet PCCNM-W Series , Cylinder & Rod Plastic Coating Neodymium Rare Earth Magnet, Notice Memo Board Office Magnets Encased in Plastic, ABS Plastic Powerful Customized NdFeB Magnets, Whiteboard Magnets, Refrigerator Magnets, Plastic Capped Bulletin Boards Magnets
3/4″ dia. x 1/8″ thick Red & Green Disc Plastic Rubber Coated Weatherproof Magnets - HSMAG
What are the advantages and disadvantages of plastic encased magnets? The biggest drawback to Neodymium magnets is while magnetically very strong, they are very physically fragile. Tough coatings, such as nickel, go a long way toward protecting the magnets from cracks and breakage. However, after repeated impacts with each other or other surfaces, even the best metal coatings will fail. Plastic coatings offer an impact and corrosion protection for the fragile
3/4″ dia. x 1/8″ thick Red & Green Disc Plastic Rubber Coated Weatherproof Magnets - HSMAG
3/4″ dia. x 1/8″ thick Red & Green Disc Plastic Rubber Coated Weatherproof Magnets parameters: Part No.: PCDNM-RB Series Size: 3/4 inch diameter x 1/8 inch thick disc. Size including plastic coating: 7/8 inch diameter x 1/4 inch thick. or (19.1 mm x 3.2 mm) Siz). Magnet encased inside impact resistant hard plastic shell. Material: Neodymium (NdFeB) Magnet Grade: N48 (also choose N40, N42, N45, N50) Magnet Shape: Disc Color: Red & Green Plating/Coating: Ni-Cu-Ni-Plastic
3/4″ dia. x 1/8″ thick Red & Green Disc Plastic Rubber Coated Weatherproof Magnets - HSMAG
3/4″ dia. x 1/8″ thick Red & Green Disc Plastic Rubber Coated Weatherproof Magnets PCDNM-RG Series, Small Disc Assorted Colour Disc Round Plastic Plating Neo (NIB) Magnet, Polypropylen Coating Strong NdFeB Magnets, whiteboard magnets, office magnets, refrigerator magnets China factory
1″ x 1/2″ x 1/4″ Block Green Plastic Coated Waterproof NdFeB Magnets - HSMAG
Rectangular magnets are more cost effective than rings and other shapes. Ideal for whiteboard magnets, office magnets, refrigerator magnets, and map pins. Perfect for hanging papers directly on any magnetic surface (except glass). Hold and categorise letters, bills, receipts, lists, paperwork & memos together! Write on them Label them with DYMO/Brother label tapes Pad-print on them, for a unique marketing device that stays on peoples fridges and filing cabinets!
1″ x 1/2″ x 1/4″ Block Green Plastic Coated Waterproof NdFeB Magnets - HSMAG
These is our popular 1″ long x 1/2″ wide x 1/4″ thick neodymium block magnet with a protective plastic coating. The plastic coating is very much durable layer of plastic, which protects the magnet from impact damage and corrosion. The plastic coating is very water resistant, but not recommended for underwater use, as the rubber seal is not guaranteed waterproof. The plastic also helps to limit slipping on smooth surfaces. 1″ x 1/2″ x 1/4″ White Plastic Capped Rectangle NdFeB Magnet
1″ x 1/2″ x 1/4″ Block Green Plastic Coated Waterproof NdFeB Magnets - HSMAG
1″ x 1/2″ x 1/4″ Block Green Plastic Coated Waterproof NdFeB Magnets Parameter Part No.: PCDNM-GL Series Size: 1″ long x 1/2″ wide x 1/4″ thick (25.4 mm x 12.7mm x 6.35mm) Material: Neodymium (NdFeB, NIB) Magnet Grade: N42, N45, N48, N50 Magnet Shape: Block & Rectangle Color: Green Plating/Coating: Ni-Cu-Ni-Plastic (Nickel-Copper-Nickel-Plastic) Tolerances: ±0.004″ x ±0.004″ Magnetization Direction: Magnetized Through Thickness (Poles on Flat Ends) **Magnet size is prior to plastic coating
We think you’ll love these
