http://www.trick-tools.com/Outside_Corner_Magnets_Twin_Pack_MST327_1329

http://www.trick-tools.com/Outside_Corner_Magnets_Twin_Pack_MST327_1329

pin 390
heart 52
Pipe alignment/welding clamp-image_2.jpg

Pipe alignment/welding clamp-image_2.jpg

pin 66
heart 3
Magnetic Circle Layout & Burning Guide - 28439 - Flange Wizard

Magnetic Circle Layout & Burning Guide - 28439 - Flange Wizard

pin 262
heart 24
Magnetic Cutting Torch Guide - 23040 - Flange Wizard

Magnetic Cutting Torch Guide - 23040 - Flange Wizard

pin 323
heart 51
A simple way to align sections of pipe for welding, using a prepared piece of angle iron

A simple way to align sections of pipe for welding, using a prepared piece of angle iron

pin 226
heart 23
Butt Welding Jig by Kiwi Kev -- Homemade butt welding jig adapted from a pair of Vise-Grips by welding a length of angle iron to one jaw and two hold downs to the other. Intended to facilitate the process of aligning tubing for end-to-end welding. http://www.homemadetools.net/homemade-butt-welding-jig

Butt Welding Jig by Kiwi Kev -- Homemade butt welding jig adapted from a pair of Vise-Grips by welding a length of angle iron to one jaw and two hold downs to the other. Intended to facilitate the process of aligning tubing for end-to-end welding. http://www.homemadetools.net/homemade-butt-welding-jig

pin 65
heart 4
Hang your welding helmet, jacket, regulator wrench, grinding shield and more with the Hel-Hook ™ Kit Make from 3/16" steel. This hook can be removed and replaced without removing the regulator on your

Hang your welding helmet, jacket, regulator wrench, grinding shield and more with the Hel-Hook ™ Kit Make from 3/16" steel. This hook can be removed and replaced without removing the regulator on your

pin 215
heart 17
A cutting torch guide that covers equipment, settings, gas, safety, how to light the torch, and more.

A cutting torch guide that covers equipment, settings, gas, safety, how to light the torch, and more.

pin 2,1k
heart 117
speech 4
The EZ-Cut Jig takes your Milwaukee Port-a-band and turns it into 3 different bandsaws

The EZ-Cut Jig takes your Milwaukee Port-a-band and turns it into 3 different bandsaws

pin 1,4k
heart 193
speech 1
Hang your welding helmet, jacket, regulator wrench, grinding shield and more with the Hel-Hook ™ Kit Make from 3/16" steel. This hook can be removed and replaced without removing the regulator on your

Hang your welding helmet, jacket, regulator wrench, grinding shield and more with the Hel-Hook ™ Kit Make from 3/16" steel. This hook can be removed and replaced without removing the regulator on your

pin 850
heart 78
speech 1
Pinterest • Celosvětový katalog nápadů
Hledat